To purchase this item, you must be 18 years of age or older. After completing your purchase, you will receive a Real ID check verification email in your inbox. Check all categories of your inbox, such as your spam, updates, social folders.

Specifications:

Firing Range: 10-12 meters

Ammo Size: 7-8 mm

Features:

• Fully automatic firing mode
• Lightweight blaster
  
• The bullets are made of water polymer and easy to break
• Rechargeable lithium battery
• The top piece (charging handle) by the buttstock connection area that looks like you can pull back and release, is merely for decoration purposes only. 
• The pattern on the Gel Ball Blaster varies (It may be slightly different from the image listed)

Dimensions:

Length of (metrics in cm):

• Blaster body: 60
• Muzzle accessory: 15.5
  
• Decorative Scope: 29.5

• 1 x Small sachet of dehydrated gel balls
• 1 x Safety glasses
• 1 x Muzzle
• 1 x Decorative Scope (Press side button, hold and slide on)
  
• 1 x USB charging cable (4 pin)
• 1 X Bottom-fed magazine
• 1 x 7.4 volt rechargeable long green battery

Attaching the Nozzle Gap & Buttstock Alignment Guide

1. Identify the Alignment Points
   Locate the big gap and small gap on both the front nozzle and the main blaster body. These gaps are designed to interlock and ensure proper orientation.

2. Align the Gaps
   Line up the big gap on the nozzle with the big gap on the blaster body, and do the same for the small gap.
   This step is critical — mismatched alignment may result in stress on the plastic during installation.

3. Install with a Gentle Twist
   Once aligned, gently twist the front nozzle into place.
   Turn only in the correct direction until all the outer segments lock flush with the blaster body.

4. Handle with Care
   ⚠️ Use extra caution during the initial twist.
   Forcing or misaligning any of the three major parts (nozzle, body, buttstock) can cause cracks or permanent damage.